BIOS EBDA/lowmem at: 00096800/00096800 Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Feb 8 09:47:26 UTC 2009 Command line: lang=en locale=en_US.UTF-8 usbdelay=5 ramdisk_size=75% KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000096800 (usable) BIOS-e820: 0000000000096800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data) BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS) BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x1c0000 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbf780 max_arch_pfn = 0x3ffffffff Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000096800 (usable) modified: 0000000000096800 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bf780000 (usable) modified: 00000000bf780000 - 00000000bf78e000 (ACPI data) modified: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS) modified: 00000000bf7d0000 - 00000000bf7e0000 (reserved) modified: 00000000bf7ec000 - 00000000c0000000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffc00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 00000001c0000000 (usable) init_memory_mapping: 0000000000000000-00000000bf780000 0000000000 - 00bf600000 page 2M 00bf600000 - 00bf780000 page 4k kernel direct mapping tables up to bf780000 @ 10000-15000 last_map_addr: bf780000 end: bf780000 init_memory_mapping: 0000000100000000-00000001c0000000 0100000000 - 01c0000000 page 2M kernel direct mapping tables up to 1c0000000 @ 13000-1b000 last_map_addr: 1c0000000 end: 1c0000000 RAMDISK: 37ad0000 - 37fefd03 ACPI: RSDP 000FA270, 0014 (r0 ACPIAM) ACPI: RSDT BF780000, 0038 (r1 7522MS A7522800 20090420 MSFT 97) ACPI: FACP BF780200, 0084 (r1 7522MS A7522800 20090420 MSFT 97) ACPI: DSDT BF780460, 6CA9 (r1 A7522 A7522800 800 INTL 20051117) ACPI: FACS BF78E000, 0040 ACPI: APIC BF780390, 008C (r1 7522MS A7522800 20090420 MSFT 97) ACPI: MCFG BF780420, 003C (r1 7522MS OEMMCFG 20090420 MSFT 97) ACPI: OEMB BF78E040, 007A (r1 7522MS A7522800 20090420 MSFT 97) ACPI: SSDT BF78FF40, 1298 (r1 DpgPmm CpuPm 12 INTL 20051117) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 01c0000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000734c0c] TEXT DATA BSS ==> [0000200000 - 0000734c0c] #3 [0037ad0000 - 0037fefd03] RAMDISK ==> [0037ad0000 - 0037fefd03] #4 [0000096800 - 0000100000] BIOS reserved ==> [0000096800 - 0000100000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #6 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ffffe20000000000-ffffe200061fffff] PMD -> [ffff880028200000-ffff88002e3fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001c0000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x00000096 0: 0x00000100 -> 0x000bf780 0: 0x00100000 -> 0x001c0000 On node 0 totalpages: 1570566 DMA zone: 56 pages used for memmap DMA zone: 1448 pages reserved DMA zone: 2470 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 765880 pages, LIFO batch:31 Normal zone: 10752 pages used for memmap Normal zone: 775680 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 8 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 0000000000096000 - 0000000000097000 PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000 PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000 PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) PERCPU: Allocating 49152 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 8, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1544030 Kernel command line: lang=en locale=en_US.UTF-8 usbdelay=5 ramdisk_size=75% Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2673.240 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Scanning for low memory corruption every 60 seconds Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x20000000 - 0x24000000 Memory: 6091544k/7340032k available (2608k kernel code, 1057768k absent, 189864k reserved, 1185k data, 372k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 5348.25 BogoMIPS (lpj=8910800) Security Framework initialized Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 APIC calibration not consistent with PM Timer: 139ms instead of 100ms APIC delta adjusted to PM-Timer: 835407 (1169485) Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5348.03 BogoMIPS (lpj=8910455) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x4 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5348.04 BogoMIPS (lpj=8910466) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU2: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x6 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5348.03 BogoMIPS (lpj=8910461) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU3: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4 APIC 0x1 ip 0x6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 5348.03 BogoMIPS (lpj=8910454) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU4: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5 APIC 0x3 ip 0x6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 5348.03 BogoMIPS (lpj=8910454) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU5: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6 APIC 0x5 ip 0x6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 5348.03 BogoMIPS (lpj=8910462) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU6: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7 APIC 0x7 ip 0x6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 5348.04 BogoMIPS (lpj=8910464) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU7: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs Total of 8 processors activated (42787.51 BogoMIPS). net_namespace: 1384 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffc000-0xf7ffc3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7ff6000-0xf7ff67ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ff5c00-0xf7ff5cff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbb80000-0xfbbfffff] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfbbfffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:06:00.0: reg 18 64bit mmio: [0xfbdff000-0xfbdfffff] pci 0000:06:00.0: reg 20 64bit mmio: [0xf6ff0000-0xf6ffffff] pci 0000:06:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff] pci 0000:06:00.0: supports D1 D2 pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff] pci 0000:07:00.0: reg 10 32bit mmio: [0xfbeff800-0xfbefffff] pci 0000:07:00.0: reg 14 32bit mmio: [0xfbeff400-0xfbeff4ff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbe00000-0xfbefffff] pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BB, should be BA [20080926] PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved system 00:08: ioport range 0xa00-0xadf has been reserved system 00:08: ioport range 0xae0-0xaef has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed10000-0xfed103ff has been reserved system 00:09: iomem range 0xfed10400-0xfed107ff has been reserved system 00:09: iomem range 0xfed10800-0xfed10bff has been reserved system 00:09: iomem range 0xfed10c00-0xfed10fff has been reserved system 00:09: iomem range 0xfec8a000-0xfec8a3ff has been reserved system 00:09: iomem range 0xfec8a400-0xfec8a7ff has been reserved system 00:09: iomem range 0xfec8a800-0xfec8abff has been reserved system 00:09: iomem range 0xfec8ac00-0xfec8afff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed40000-0xfed8ffff could not be reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: disabled pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0xc000-0xcfff pci 0000:00:03.0: MEM window: 0xf8000000-0xfbbfffff pci 0000:00:03.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.4: IO window: 0xe000-0xefff pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff pci 0000:00:1c.4: PREFETCH window: 0x000000f6f00000-0x000000f6ffffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xfbe00000-0xfbefffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0x0-0x0] bus: 01 index 2 mmio: [0x0-0x0] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xc000-0xcfff] bus: 02 index 1 mmio: [0xf8000000-0xfbbfffff] bus: 02 index 2 mmio: [0xc0000000-0xdfffffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0x0-0x0] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 mmio: [0x0-0x0] bus: 04 index 1 mmio: [0x0-0x0] bus: 04 index 2 mmio: [0x0-0x0] bus: 04 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0xe000-0xefff] bus: 06 index 1 mmio: [0xfbd00000-0xfbdfffff] bus: 06 index 2 mmio: [0xf6f00000-0xf6ffffff] bus: 06 index 3 mmio: [0x0-0x0] bus: 07 index 0 mmio: [0x0-0x0] bus: 07 index 1 mmio: [0xfbe00000-0xfbefffff] bus: 07 index 2 mmio: [0x0-0x0] bus: 07 index 3 mmio: [0x0-0x0] bus: 08 index 0 mmio: [0x0-0x0] bus: 08 index 1 mmio: [0x0-0x0] bus: 08 index 2 mmio: [0x0-0x0] bus: 08 index 3 io port: [0x00-0xffff] bus: 08 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 5247k freed VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 11909 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:02:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie01: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pcieport-driver 0000:00:03.0: irq 766 for MSI/MSI-X pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie01: allocate port service pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: found MSI capability pcieport-driver 0000:00:07.0: irq 765 for MSI/MSI-X pci_express 0000:00:07.0:pcie00: allocate port service pci_express 0000:00:07.0:pcie01: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 764 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pcieport-driver 0000:00:1c.4: irq 763 for MSI/MSI-X pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pcieport-driver 0000:00:1c.5: irq 762 for MSI/MSI-X pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support aer 0000:00:07.0:pcie01: AER service couldn't init device: no _OSC support Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 372k freed input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 7 Switched to high resolution mode on CPU 6 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller Switched to high resolution mode on CPU 0 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7ffe000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffc000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected ohci1394 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ohci1394 0000:07:00.0: setting latency timer to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fbeff800-fbefffff] Max Packet=[2048] IR/IT contexts=[4/4] SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 761 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf7ff6000 port 0xf7ff6100 irq 761 ata2: SATA max UDMA/133 abar m2048@0xf7ff6000 port 0xf7ff6180 irq 761 ata3: SATA max UDMA/133 abar m2048@0xf7ff6000 port 0xf7ff6200 irq 761 ata4: SATA max UDMA/133 abar m2048@0xf7ff6000 port 0xf7ff6280 irq 761 ata5: SATA max UDMA/133 abar m2048@0xf7ff6000 port 0xf7ff6300 irq 761 ata6: SATA max UDMA/133 abar m2048@0xf7ff6000 port 0xf7ff6380 irq 761 usb 1-5: new high speed USB device using ehci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 2-1: new high speed USB device using ehci_hcd and address 2 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 usb 2-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 5-2: new low speed USB device using uhci_hcd and address 2 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133 ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 usb 5-2: configuration #1 chosen from 1 choice ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100, ATAPI AN ata3.00: configured for UDMA/100 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000193ad2d] ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5 scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5 Driver 'sr' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.65 PQ: 0 ANSI: 4 sd 6:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00 sd 6:0:0:0: [sdc] Assuming drive cache: write through sd 6:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00 sd 6:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 6:0:0:0: [sdc] Attached SCSI disk usb-storage: device scan complete scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 7:0:0:0: [sdd] Attached SCSI removable disk scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 7:0:0:1: [sde] Attached SCSI removable disk scsi 7:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 sd 7:0:0:2: [sdf] Attached SCSI removable disk scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 7:0:0:3: [sdg] Attached SCSI removable disk usb-storage: device scan complete ISO 9660 Extensions: RRIP_1991A squashfs: version 3.4 (2008/08/26) Phillip Lougher Registering unionfs 2.5 (for 2.6.27-rc6) loop: module loaded unionfs: new lower inode mtime (bindex=0, name=run) rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: SSDT BF78E0C0, 03C1 (r1 DpgPmm P001Ist 11 INTL 20051117) processor ACPI_CPU:00: registered as cooling_device0 ACPI: SSDT BF78E490, 03C1 (r1 DpgPmm P002Ist 12 INTL 20051117) processor ACPI_CPU:01: registered as cooling_device1 ACPI: SSDT BF78E860, 03C1 (r1 DpgPmm P003Ist 12 INTL 20051117) processor ACPI_CPU:02: registered as cooling_device2 ACPI: SSDT BF78EC30, 03C1 (r1 DpgPmm P004Ist 12 INTL 20051117) processor ACPI_CPU:03: registered as cooling_device3 ACPI: SSDT BF78F000, 03C1 (r1 DpgPmm P005Ist 12 INTL 20051117) processor ACPI_CPU:04: registered as cooling_device4 ACPI: SSDT BF78F3D0, 03C1 (r1 DpgPmm P006Ist 12 INTL 20051117) processor ACPI_CPU:05: registered as cooling_device5 ACPI: SSDT BF78F7A0, 03C1 (r1 DpgPmm P007Ist 12 INTL 20051117) processor ACPI_CPU:06: registered as cooling_device6 ACPI: SSDT BF78FB70, 03C1 (r1 DpgPmm P008Ist 12 INTL 20051117) processor ACPI_CPU:07: registered as cooling_device7 usbcore: registered new interface driver hiddev ACPI: WMI: Mapper loaded input: Logitech USB Receiver as /class/input/input4 generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver input: PC Speaker as /class/input/input5 iTCO_vendor_support: vendor-support=0 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:06:00.0: setting latency timer to 64 r8169 0000:06:00.0: irq 760 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc20000064000, 00:24:21:a7:21:a9, XID 3c4000c0 IRQ 760 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 PPP generic driver version 2.4.2 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 Error: Driver 'pcspkr' is already registered, aborting... hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sr 2:0:0:0: Attached scsi generic sg2 type 5 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 7:0:0:0: Attached scsi generic sg4 type 0 sd 7:0:0:1: Attached scsi generic sg5 type 0 sd 7:0:0:2: Attached scsi generic sg6 type 0 sd 7:0:0:3: Attached scsi generic sg7 type 0